The Effect of Noble-Metal Deposition Routes on the Characteristics and Photocatalytic Activity of M-TiBi1.9%O2 (M = Pt and Pd)

Topics in Catalysis - The effect of deposited noble-metals and their deposition routes on the photocatalytic decomposition of organic pollutants over M-TiBi1.9%O2 (M?=?Pt and Pd) under...     

铌对取向硅钢冷轧组织织构的影响

采用光学显微镜(OM)、电子背散射衍射(EBSD)等研究了铌对取向硅钢冷轧过程中的组织与织构的影响。结果表明:含铌正火板和不含铌正火板经冷轧后都是条带状组织,但含铌冷轧板在宽度方向更窄。铌元素的存在对织构也具有优化作用,经过中间退火后,含铌冷轧板二次冷轧织构得到明显改善,相较于不含铌二次冷轧板拥有强度较低的旋转立方织构以及强度较高的{111}<112>织构,其取向密度最高可达12.460。     

基于儒可夫斯基变换的涡轮钻具叶片设计及性能分析

为提高涡轮钻具叶片使用性能和创新叶片设计理论,提出了基于儒可夫斯基保角变换法与经典水力翼型相结合的涡轮钻具叶片设计新方法,以?127涡轮钻具叶片为研究对象,运用搭建的涡轮钻具叶型参数化设计平台和自主设计的涡轮钻具性能测试台架,完成了5种翼型的造型设计,研究了5种叶片流场性能,开展了设计叶片的性能测试实验,对比分析了设计叶片与塔里木油田某型在役?127涡轮叶片的实际效能。实验及仿真结果表明,基于新方法设计的NACA-0012翼型加厚叶片在600 r/min转速及15 L/s流量的设计工况下,其单级扭矩达5.83 N·m,较相同条件下某在役?127涡轮的单级扭矩提高约6.4%,级效率提高约1.16%,整体性能有了实质提升。     

Evolution mechanism of active groups and thermal effects of Chinese lignite in low-temperature oxidation

Abstract

The evolution of active groups at low temperature was examined using Chinese lignite by infrared technology and X-ray photoelectron spectroscopy (XPS). The results showed that the hydroxyl, aliphatic ether, methylene, and methyl groups played important roles in the low-temperature oxidation of lignite below 200?°C. Carbonyl and carboxyl groups were important intermediates. Thus, a multi-step evolution mechanism involving the hydroxyl, aliphatic ether groups, and alkane was reasoned to describe the low-temperature oxidation of lignite. In addition, according to the oxidation kinetics experiment and the evolution laws of the active groups, the ratios of the reaction lines were determined considering the accuracy of thermal effects. The thermal effects and the heat release intensities of each temperature interval were obtained based on the evolution mechanism and the reaction ratios. The shortest spontaneous combustion period of lignite was calculated and compared with the experimental value, which proved that the reasoned evolution mechanism of the active groups and the calculations of the thermal effects were reliable.     

球化退火工艺对高碳马氏体不锈钢8Cr13MoV组织及性能的影响

为了优化高碳马氏体不锈钢8Cr13MoV的球化热处理工艺,提高其退火后的冷加工性能,采用微观组织分析法以及拉伸力学分析法研究了球化退火过程中奥氏体化保温时间和冷却速率对8Cr13MoV钢的球化效果影响。结果表明, 随着奥氏体保温时间的增加,组织中细颗粒状碳化物数量减少,索氏体数量增多,试样硬度先降低后升高,但断后伸长率持续增加;随冷却速率增加,试样组织中细颗粒状碳化物和索氏体数量、硬度和强度增加,断后伸长率降低。综合对比,奥氏体保温时间ϕ90 min时试样综合力学性能较好,冷却速率应控制在25 ℃·h^-1以内。与奥氏体保温时间相比,冷却速率对力学性能的影响更加显著。     

Tertiary‐amine‐free,non‐planar,sulfone‐containing,tetrafunctional epoxy and its application as a high temperature matrix

Non‐amine‐derived tetrafunctional epoxies have several advantages over the amine‐derived N,N,N′,N′‐tetraglycidyl‐4,4′‐diaminodiphenyl methane (TGDDM) in high temperature applications. Although two non‐amine‐derived tetrafunctional epoxies were developed in our laboratory, further improvements in toughness using less loading amount is still desirable. Thus, a tertiary‐amine‐free, non‐planar and triphenylmethane‐containing tetrafunctional epoxy (STFE) with a sulfone spacer was synthesized. When it was mixed with diglycidyl ether of bisphenol A (DGEBA) and cured with 4,4′‐diaminodiphenylsulfone (DDS), both thermal and mechanical performances outperformed TGDDM. Moreover, STFE modified system shows the highest toughness (35.7 kJ m^–2) among three amine‐free and triphenylmethane‐containing epoxies at merely 5 wt% loading. Molecular simulation and thermomechanical analysis results suggest that the improved mechanical properties could be related to the geometry of the molecule and larger free volume. Despite a marginal drop in T_g, the thermal degradation temperature is better than that of TGDDM/DDS. In addition, the moisture resistance of STFE/DGEBA/DDS is much better than that of TGDDM/DDS. Thus, STFE modified DGEBA could be a potential replacement for TGDDM in some high temperature applications. © 2020 Society of Chemical Industry